|
|
You could be saving upto 1.5 litres on every flush with 5 Bio-Misers, that's almost 10,000 litres a year on a managed cistern and as much as 78,000 litres on an unmanaged cistern. That's an approximate cost saving of between £130 - £1100.
Every Bio-Miser contains RODs that are loaded with millions and millions of good bacteria that help to eliminate odours and reduce blockages. For the good Bacteria
to work properly you can turn the flush rate down usually from an average
of This can save you around 120 flushes
every day on an unmanaged cistern and 16 flushes a day on a managed
cistern. That's a vast amount of water and money that you're currently
flushing down the drain! Bio-Miser is better than cistern blocks and chemical dosing machinesThe Biological Rods contained within the Bio-Miser are highly efficient cistern blocks containing millions of bacteria along with water softening salt and a long lasting foam action. The patented Bio-Miser Green Technology is so simple and effective that it allows the RODS to last upto 2 months, whereas cistern blocks run out after just a few days. Its design also allows for an equal dose of good bacteria on every flush throughout the entire service period, again a cistern block cannot regulate dosage. The Bio-Miser
reduces cleaning and servicing time, maintenance and blockages in
pipework and
will BIO-MISER IS GREENER THAN GREENThe Bio-Miser is a very green product as it is made from recyclable plastic and is driven by bacteria which are natures cleaning agents. The bacteria are washed away and are not harmful to filter beds in the same way harsh toilet cleaning chemicals can be. The Bio-Miser saves vast amounts of water and it doesn't require batteries, electronics or LED's. It simply sits in the cistern not consuming energy, gently cleaning the urinals 24 hours a day. PLUS as it is made in England and doesn't have to make a 6 week journey from China it has a very small carbon footprint Installation and Servicing is easy!It is extremely easy to install the Bio-Miser simply slide the locating ring over the cistern flush valve (fig 1) and slide down to within1" of the base and gently push fit each Bio-Miser into place (fig2). When you come to replace the Bio-Miser just give it a slight twist & pull from the cistern leaving the locating ring in place. It really is that easy & unlike cistern blocks you will only have to do this once every 2-3 months.. and unlike dosing units there is no need to drill into walls, no batteries to change, no LED'S to set and no fiddly switches to mess with. You can use
BIO-MISER
on its own
|
|
|
|
|
|
Washroom Services
Ltd 116
Biz Space Business Park Upper Villiers Street Wolverhampton West Midlands
WV2 4XD |